Tag Archives: automatic

Orthodontics

The cephalometry is a fundamental study to be performed by professionals for orthodontic treatments. The same diagnosis is indispensable in order to assess the treatment plan to perform, and thus give the patient a good orientation on the same. In this type of study, you can observe the causes of skeletal pathologies and dysfunctions as scissor bite, bites open; Since the results cefalometicos will give us a diagnosis of mandibular skeleton of the patient. It is the procedure by which a facial abnormality is identified. In orthodontics, the diagnosis is the basis for any therapeutic decision. A correct diagnosis requires varied elements, organized and studied will lead us to deliver the best treatment to our patients. A proper study of the cephalograms defines the type of profile of each patient. With ell, we define the type of facial pattern and also tooth pattern.

This is the basis for the realization and treatment planning. Therefore the x-ray cephalometric within orthodontics is the most important part of the diagnosis. What data does the cranial measurement studies? When a study is made of such a patient for any dental treatment, is watching with the study the harmony of the face, profile, the anatomy of the facial skeleton, etc. And with all these data, it is much easier and more practical to make a treatment plan, which will include not only retail therapy in itself, but which may also modify facial aesthetics in general. The analysis of this study of the skull gives us an exhaustive study of the profile of the patient that can be characterized in 3 different types profile Brachycephalic: mandibular angle is almost straight, and therefore used more strength for chewing. The masseter muscle is wider than usual, which gives the face a compressed appearance. Dolicocephalic profile: Facial heights are increased and the face seems rather elongated. Has more easily for Chew since mandibular angle is increased.

Mesocefalo profile: Is the profile that should have a patient who does not need any orthodontic treatment, since the angle and chewing are absolutely normal. The vast majority of professionals who are dedicated to orthodontics patient requested that this study be undertaken, but not many of the dentists know interpret it correctly. And no, just ask the cephalometry to avoid later problems with respect to malpractice. What many professionals do not consider in any type of treatment plan, is that you there are different specific pathologies needing a plan, that if not carried out at the time, then it will be an irreversible case, both for the dentist and the patient. Of course, at present, different types of cephalograms, from the most common ones that give only a general response, where the result will be more generic, as advanced in which more specific patient data are obtained. Why is the a professional who must recommend the place where this study, based on the needs you may have will be practiced.

Environment Protection Adoption

Advantages of ore dressing plant used in Barite Barite powder is white or gray crystalline powder, is an important mineral containing barium, chemically inert, good stability, acid, density, hardness, high specific gravity, high whiteness, can absorb the harmful rays (x-ray and?-rays), etc., to glass gloss, non-magnetic and non-toxic. Thus, widely used in chemical, paint, rubber, glass, paper, medicine and other fields, according to the latest statistics, the size of the use of more than 2000 items. high specific gravity, high whiteness, can absorb the harmful rays (x-ray and?-rays), etc., to glass gloss, non-magnetic and non-toxic. Thus, widely used in chemical, paint, rubber, glass, paper, medicine and other fields, according to the latest statistics, the size of the use of more than 2000 items. The most commonly used crushers and grinding mills in iron ore crushing and grinding process for iron ore mining are mill, ultrafine grinding ball mill, etc.

In iron ore mining, miner usually choose to complete iron ore crushing plant for metallurgy. At present, the most popular iron ore production line consists of two jaw crushers. After beening crushed, the material will be transported for the magnetic separation, and then into the ball mill for grinding. The main bearing and each dial are driven by electromotor of main equipment through reducer, and numbers of rings and rolls which are rolling in the ring channels are driven by dial through plunger. After being crushed by hammer crusher, the big materials become small ones and they are sent to the storage bin by elevator. The electromagnetic vibrating feeder sends them to the middle of first dial evenly; the materials will be driven to the edge of dial by centrifugal force, and fall into the channels and ring are pressed, crushed and ground by the grinding rings and rolls. Then the materials fall into the second and third ring and crushed and ground. The high pressure centrifugal blower inhale air from the outside and blow the materials which are ground in the third ring to powder Separator.

The rotating turbo in the powder Separator makes the coarse materials return to the mill and reground, while the fineness mixes with the air and be drawn to the cyclone and be discharged from the discharging valve which is in the bottom of it. The air mixed with very little fineness which are purified by impulse dust catcher and discharged by blower and muffler. 1 High-efficiency and low consumption With the same end-products fineness and motor power, its output is over 1 time of that of Jet Mill, Mix Mill and Ball Mill. 2 Easy-damaged parts with longer working life The grinding roll and ring are made of special materials. Generally, their work life is more than one year, but, which could eat up to over 3 years, when it processes calcium carbonate and Calcite. 3 Security and Reliablity Because there are no rolling bearing and bolts in the grinding chamber, we can not see the problems of easily damaged and sealings and bearings machine destroyed due to the looseness bolts. 4. Cleansing and Environment Protection Adoption of press dust collector and muffler reduces the industrial dust pollution and noise, which reaches the National Standard.